Support
Service & support
Guides and videos for assembling, lighting and looking after your Kindle heater. Need a hand? We’re here to help.
Call+1.310.400.3024
Workshop2048 Armacost Ave., 1st Floor
Los Angeles, CA 90025
Los Angeles, CA 90025
Troubleshooting
The pilot won’t light
The two most common causes:
- Air in the gas line, often after changing the tank. Hold the control knob in on PILOT for a full 2 minutes to purge it.
- Low gas pressure. Check that the tank isn’t running low and that the regulator is working.
Still not lighting? Watch the videos below, or call us.
If you smell gas, turn off the gas supply at the tank and don’t try to light the heater.
Manuals & guides
Assembly manual
Step-by-step assembly instructions for the propane Allison and Bella heaters.
Open the manual →
Pilot flame guide
What a correct pilot flame looks like, and what to check for if yours is noisy, lazy, yellow or too small.
View the guide →
Basic heater disassembly
Diagrams showing how to take the burner assembly apart for cleaning and service.
View the diagram →




